McNETT® - Essentials for AdventureTM

Sole Repair

  • Rebuilding Heels

    • Bookmark and Share
    • Rebuilding heels

      Step 1:

      Freesole rebuilds heels. Sand worn area then buff with a rag soaked in rubbing alcohol. Make plastic tape “dam” as shown. Set sole level and apply Freesole. Cures in 12-24 hours.

  • Rebonding Soles

    • Bookmark and Share
    • Re_Bonding Boot Soles

      Step 1:

      Use Freesole® to permanently re-bond a peeling boot sole. First remove loose dirt and debris and then clean the area with rubbing alcohol and a stiff brush. Apply Freesole to the sole evenly. Use a filled water bottle, C-clamp or tape to hold sole and upper tightly together overnight.

Find more great tips like these in our Repair Guide

  • High Speed, Field Repairs

    High Speed, Field Repairs

    For quick, grab-and-hold repairs in the field, opt for neoprene-based contact cement. Contact cements are formulated specifically for rapid tack and bonding. Seal Cement™ Neoprene Contact Cement cures to full strength in only 15 to 30 minutes and creates a strong, durable, flexible bond.
  • Boot Lacing Tip

    Boot Lacing Tip

    Relieve pressure and give your boots a custom fit with these lacing tricks. 1. Use “Skip Lacing” to take pressure off sensitive areas 2. Use the “Double Wrap” to have different levels of tightness on upper and lower sections of the boot.