Knotting the Thread
-
-
Step 1:
After threading the needle, wrap the ends of thread around the pointer finger. Make an “X” whith the tread.
-
Step 2:
Place your thumb over the “X”. Roll the thread back and forth a couple of times between you pointer finger and thumb.
-
Step 3:
Slide the knot off your finger with your thumb, rolling the threads together towards the end of your pointer finger while pinching the thread.
-
Step 4:
I Slide the knot to the end of the thread by gently sliding the knot to the end of the thread using the end of your pointer finger and thumb.
Find more great tips like these in our Repair Guide
-
Dry Suit zippers are tough to operate and expensive to replace. To ease opening and maximize zipper life, remove dirt and gunk with Zip Care™ Liquid Zipper Cleaner & Lubricant. For heavy duty lubrication use Zip Tech™ Stick Lubricant.
-
Relieve pressure and give your boots a custom fit with these lacing tricks. 1. Use “Skip Lacing” to take pressure off sensitive areas 2. Use the “Double Wrap” to have different levels of tightness on upper and lower sections of the boot.