Making a Toe Cap
-
-
Step 1:
Climbers and hikers create tough toe caps with Freesole to protect boots from sharp rocks and crampons.
Start with a clean, dry boot. Stuff newspaper tightly inside the boot toe area. Apply tape tightly across toe to create straight edge. Lightly sand the toe area with sandpaper, then buff aggressively with a rag dipped in rubbing alcohol. Allow to dry and buff a second time with rubbing alcohol.
-
Step 2:
Paint the surface with Freesole. Be sure to cover all areas between the sole and the tape. Freesole will self level and become smooth.
-
Step 3:
Wait 45 minutes, then peel off tape. Do not leave tape on longer! Allow your new toe cap to cure completely overnight.
Find more great tips like these in our Repair Guide
-
Knot the thread before sewing
-
Mountaineering boots are built with the roughest terrain and wettest conditions in mind. These boots may use full-grain leather and often include Gore-Tex® fabric for maximum dryness. Weatherproofing: Use ReviveX Leather Gel Water Repellent