Wash Your Climbing Ropes
-
-
Step 1:
Before washing, tie rope into a Daisy Chain to minimize kinking and tangles. Double the rope by bringing both ends together. Tie in a knot, leaving the loose ends in a short tail.
-
Step 2:
To make the first chain, loop the rope as if you were making an overhand knot.
-
Step 3:
Reach your free hand down through the loop and pull the rope partially through. This is the start of your second chain “link”. Continue to pull the remaining rope through each successive loop until you reach the end.
-
Step 4:
Add 1 oz ReviveX® Climbing Rope Cleaner Concentrate to empty washer. Use the medium water setting (10 gallons). Wash the daisy chained rope using the delicate cycle and cold water. Hang or lay flat to dry. It may take as long as 48 hours to fully dry.
Find more great tips like these in our Repair Guide
-
With exposure to sunlight, saltwater, and chlorine, synthetic gaskets degrade over time due to the loss of structural oils called plasticizers. Proper protection with UV Techâ„¢ is essential for maximizing scuba gear life.
-
Kayak cockpits are notorious for cutting into spray skirts and causing exterior cracking. Apply spot applications of Aquaseal to permanently repair and protect both the interior and exterior.